Anyị bụ otu n'ime ndị na-ebubata ngwa ahịa FA kacha mma na China. Ngwaahịa anyị bụ isi gụnyere moto servo, igbe gear planetary, inverter na PLC, HMI. Ụdị ngwaahịa gụnyere Panasonic, Mitsubishi, Yaskawa, Delta, TECO, Sanyo Denki, Scheider, Siemens, Omron na ndị ọzọ; Oge mbupu: N'ime ụbọchị ọrụ 3-5 mgbe enwetara ụgwọ ahụ. Ụzọ ịkwụ ụgwọ: T/T, L/C, PayPal, West Union, Alipay, Wechat na ndị ọzọ.
Nkọwa Ngwaahịa
Nkọwa Ngwaahịa
| Akụkụ | |
| Obosara Ngwaahịa: | 45 mm |
| Ogologo Ngwaahịa: | 88.3 mm |
| Omimi/Ogologo Ngwaahịa: | 70.5 mm |
| Ibu Ngwaahịa: | 0.13 n'arọ |
| Teknụzụ | |
| Nhazi Oke: | 1.7 ... 2.3 A |
| Voltaji ọrụ enyere ọkwa: | Sekit Inyeaka 600 V AC/DC |
| Isi sekit 690 V AC | |
| Isi sekit 600 V DC | |
| Egosipụtara na Ọsọ Ọrụ (Ie): | 2.3 A |
| Ugboro ole e nyere ọkwa (f): | Sekit Inyeaka 50 Hz |
| Sekit Inyeaka 60 Hz | |
| Okirikiri inyeaka DC | |
| Isi sekit 50 Hz | |
| Isi sekit 60 Hz | |
| Voltaji Impulse Enyere Aka (Uimp): | Okirikiri inyeaka 6 kV |
| Isi sekit 6 kV | |
| Voltaji mkpuchi a tụrụ anya ya (Ui): | 690 V |
| Ọnụọgụ nke ogidi: | 3 |
| Ọnụọgụ nke Ndị Nnyemaaka NC: | 1 |
| Ọnụọgụ nke kọntaktị enyemaka NO: | 1 |
| Ọnụọgụ nke ogwe osisi echekwara: | 3 |
| Ọkụ Okpomọkụ nke ikuku na-anaghị ekpo ọkụ (Ith): | Sekit Inyeaka NC 6 A |
| Sekit Inyeaka NO 4 A | |
| AC-15 (Ie) nke arụ ọrụ enyere ọkwa: | (120 V) NC 3 A |
| (120 V) NO 0.5 A | |
| (240 V) NC 3 A | |
| (240 V) NO 0.5 A | |
| (400 V) NC 0.75 A | |
| (400 V) NO 0.5 A | |
| (500 V) NC 0.75 A | |
| (500 V) NO 0.5 A | |
| Ọnọdụ Ọrụ DC-13 (Ie) Enyere Ego: | (125 V) NC 0.55 A |
| (125 V) NO 0.55 A | |
| (24 V) NC 1.25 A | |
| (24 V) NO 1.25 A | |
| (250 V) NC 0.27 A | |
| (250 V) NO 0.27 A | |
| (500 V) NC 0.15 A | |
| (500 V) NO 0.15 A | |
| (60 V) NC 0.55 A | |
| (60 V) NO 0.55 A | |
| Ogo Nchedo: | IP20 |
| Ogo Mmetọ: | 3 |
| Njikọ Ike Inyeaka Sekit: | Na-agbanwe agbanwe na Ferrule 1/2x 0.75 ... 2.5 mm² |
| Na-agbanwe agbanwe na Ferrule Insulated 1x 0.75 ... 2.5 mm² | |
| Na-agbanwe agbanwe na Ferrule Insulated 2x 0.75 ... 1.5 mm² | |
| Mgbanwe 1/2x 0.75 ... 1 mm² | |
| Mgbanwe 1/2x 1 ... 2.5 mm² | |
| Siri ike 1/2x 0.75 ... 4 mm² | |
| Isi Sekit Njikọta Ike: | Na-agbanwe agbanwe na Ferrule 1/2x 0.75 ... 4 mm² |
| Na-agbanwe agbanwe na Ferrule mkpuchi 1/2x 0.75 ... 4 mm² | |
| Mgbanwe 1/2x 0.75 ... 4 mm² | |
| Siri ike 1/2x 0.75 ... 4 mm² | |
| Torque nke na-eme ka ọ sie ike: | Sekit Inyeaka 1 ... 1.2 N·m |
| Isi sekit 1.5 ... 2.5 N·m | |
| Ogologo Ịdọpụ Waya: | Okirikiri inyeaka 9 mm |
| Isi Circuit 12 mm | |
| Onye ọkwọ ụgbọala Skru akwadoro: | Isi sekit Pozidriv 2 |
| Mfu Ike: | na Ọnọdụ Ọrụ Enyere Oke na Pole 1.1 ... 2.0 W |
| Dabara adaba maka: | AF09 |
| AF12 | |
| AF16 | |
| AF26 | |
| AF30 | |
| AF38 | |
| Ụkpụrụ: | IEC/EN 60947-1 |
| IEC/EN 60947-4-1 | |
| IEC/EN 60947-5-1 | |
| UL 60947-1 | |
| UL 60947-4-1 | |
| IEC 60335-2-40 A2L |
Ndị otu anyị
Anyị nwere ihe karịrị afọ iri ahụmịhe na ngwaahịa pneumatic nke a na-eji na ngalaba akpaaka ụlọ ọrụ! Anyị na-elekwasị anya na ngwaahịa pneumatic dịka ihe na-eme pneumatic, valvụ njikwa pneumatic, ngwaahịa nkwadebe ikuku na ihe mgbakwunye!
Akụkọ Anyị
Anyị ebupụla ngwaahịa pneumatic anyị na ihe karịrị mba na mpaghara iri ise! Anyị nwere akara FOUCS nke anyị ma nweekwa mmekọrịta chiri anya na ogologo oge na ụdị ama ama! N'ihi ịdị mma anyị dị elu, ọnụ ahịa asọmpi na nnyefe ngwa ngwa, anyị enyerela ọtụtụ ndị ahịa anyị aka ịga nke ọma n'ahịa ha! Anyị ga-anọgide na-emeziwanye onwe anyị iji mezuo ihe ndị ahịa chọrọ!
Anyị na-enye naanị ezigbo ngwaahịa na ngwugwu mbụ! Anyị na-arụkarị ọrụ na ụdị ndị a ma ama dịka
Ndị ahịa ekwesịghị ichegbu onwe ha maka ịdị mma ya n'ihi na anyị na-enye akwụkwọ ikike mgbe erechara ngwaahịa ọ bụla anyị rere!
Anyị na-elekwasị anya n'ọrụ otu nkwụsị maka ndị ahịa anyị, anyị dịkwa mma n'ọtụtụ ụdị ngwaahịa akpaaka pneumatic dịka Airtac SMC Festo Rexroth CKD Honewell Koganer ...
Anyị na-echekwa ngwaahịa dị elu maka ụdị ndị a ma ama site na ụdị dị iche iche ka anyị wee nwee ike izipu ha n'oge dị mkpirikpi ozugbo ndị ahịa anyị kwụrụ anyị ụgwọ! Ndị ahịa anyị achọghị ichere ogologo oge maka mbupu!
1) Ngwaahịa anyị niile bụ nke ọhụrụ na nke mbụ, ha dịkwa mma nke ukwuu.
2) Ọnụ ahịa anyị dị oke mma.
3) Anyị nwere ọtụtụ ngwaahịa dị na ngwaahịa anyị, yabụ anyị nwere ike inyere ndị ahịa aka inweta ihe ndị siri ike inweta.
4) A ga-enyocha ajụjụ niile nke ọma ma zaa ha n'ime awa iri abụọ na anọ.
5) Mbupu ngwa ngwa, yana ọrụ dị mma mgbe erechara ahịa
6) Anyị ga-ebuga ihe ndị ahụ n'ime ụbọchị ọrụ 1-3 mgbe a natara ụgwọ ahụ.
7) Njikwa dị elu, a ga-anwale ngwaahịa niile otu otu tupu ebuga ha.
8) Ngwugwu dị mma iji chebe ngwaahịa ndị ahụ.
9) Ndị otu nkwado teknụzụ nwere ahụmịhe.
